Optical flat objects geometry measurement
The instrument for flat objects geometry inspection allows to identify and measure geometrical parameters of transparent and non-transparent objects, such as:
- shaped plates;
- other flat elements (50х50х10 mm).
The unit operation is based on a through-transmission measuring method. Diffused light source illuminates the object boundary for the high-resolution camera with the installed telecentric lens, that allows to eliminate prospective distortions (the image dimensions remain the same at any distance from the lens to the inspected object).
The object image is processed by means of a special software complex, that allows to carry out the following measurements, based on the image decomposition to simple geometric elements:
- distance measurement between the parallel faces;
- angles measurement between the faces;
- measuring spherical radius of the angles;
- measuring diameters and coordinates of the holes centers;
- measuring mutual elements arrangement;
- measuring distance between two preset points.
Geometrical parameters monitoring is based on comparison of received image with the user's drawing (in case of complex objects inspection), or with the tolerances table (in case of the rings inspection and other simple shaped objects).
|Permissible absolute limit of error during the linear dimensions measurement, max, mm||0.01|
|Permissible absolute limit of error during the measurement of the angles between the faces (at faces length 5 mm min) max, degrees||0.1|
|Continuous operation time, hour||24|
|Power voltage, V||220|
|Power frequency, Hz||50 (±1)|
|Power consumption, max, Watt||1000|
|The range of operating temperatures, °С||from 16 to 26|
|Relative air humidity, %||80|
|Overall unit dimensions, mm||200х250х320|
|Weight, max, kg||7|
The system for cylindrical tubes geometrical dimensions inspection...
PROBIUS UNO system measures different parameters of smooth...
A device for precise control of the outer...